● China table top steam sterilizer transportation and storage conditions: ambient temperature -40°C-75°C; relative humidity ≥95%; atmospheric pressure range 70-106Kpa;

● Pulsation working mode: microcomputer control automatically selects the number of pulsating times according to site conditions; vacuum working mode: three pre-vacuum;

● Microcomputer control technology: touch buttons; digital dynamic display of temperature and time; two working temperatures of 121°C and 135°C are available for selection, and the sterilized items are classified into: bare instruments, cotton yarn, wrapped instruments, plastic and rubber instruments , the default working temperature is 135°C; high-vacuum automatic drying, suitable for drying requirements of different items;

● Vacuum, water injection, temperature rise, sterilization, pressure relief, exhaust, drying, and power failure are automatically completed; abnormal equipment operation is automatically detected and alarmed;

● After the sterilization is completed, the buzzer will automatically prompt, and END will display completion;

● Material: The sterilization chamber is made of 304 stainless steel, thickness ≥ 3mm; safety door thickness ≥ 15mm, water pressure test ≥ 0.8mpa, exceeding the national standard designed in YY0646-2008;

● Sealing structure: the sealing ring is made of silica gel, and the designed service life is nine years (12,000 times) without aging or deformation; the threaded screw door lock ensures safe use and easy operation;

● china table top steam sterilizer automatically cuts off the power when the design temperature is exceeded, the power is automatically cut off when the design pressure is exceeded, and the safety valve automatically opens when the design pressure exceeds the limit.