For laboratories with a barrier environment, the table top steam sterilizer is an essential instrument. The sterile clothing and sterile shoes within the barrier, as well as the cages and water bottles required for experimental animals, all need to pass the table top steam sterilizer. high pressure to enter the barrier system. Once there is a problem with the table top steam sterilizer, the clothes cannot be sterilized in time, which affects the normal entry and exit of the barrier system.

What I want to talk about today is that the interlayer pressure cannot meet the requirements and cannot be sterilized due to air leakage during the use of the table top steam sterilizer. What should I do?

First of all, let's talk about the table top steam sterilizer. It uses saturated steam of high temperature and high pressure as the working medium, which can effectively kill all kinds of bacteria, viruses and other microorganisms in a short time to achieve the purpose of disinfection and sterilization.

The normal use procedure of the table top steam sterilizer is to first turn on the power of the air compressor, and after the pressure reaches the specified value, open the compressed air valve. Then turn the power key switch to the right to enter the operation interface, and the equipment is preheated.

Then put the items to be sterilized into the table top steam sterilizer, close the front door, select different sterilization programs according to the different items to be sterilized, check whether the sterilization parameters are correct, and then start the sterilization program. After sterilization, open the back door after the indoor pressure returns to a safe range. Check the sterilization label to check the sterilization effect. The sterilization effect is qualified and the item can be taken out after cooling down. If the sterilization is not qualified, a new sterilization indicator strip needs to be pasted for re-sterilization.