Table top steam sterilizer is a common medical equipment, mainly used for steam sterilization of medical devices, medicines, clothing, etc. When using table top steam sterilizer, you need to pay attention to the following aspects to ensure its safety and effectiveness.

1. Check before use: Before using the table top steam sterilizer, it is necessary to carefully check whether the functions and performance of the device are normal. Including checking whether steam generators, pressure gauges, thermometers, water level gauges and other equipment are in good condition, and checking whether door locks, gaskets and other parts are loose or damaged.

2. Operating procedures: When using the table top steam sterilizer, you need to follow the operating procedures. For example, the correct steps of adding water, pouring water, deflation, closing the door, etc., as well as the correct selection of sterilization procedures and time, etc. Especially when adding and pouring water, care must be taken to avoid scalding and water contact with electrical appliances.

3. Load items: When using the table top steam sterilizer, you need to pay attention to the placement method and quantity of the load items. According to different load items and sterilization requirements, the load items should be placed reasonably to ensure that the steam can be fully covered and sterilized. At the same time, do not overload to avoid affecting the sterilization effect.

4. Cleaning and maintenance: table top steam sterilizer needs regular cleaning and maintenance. After use, it is necessary to clean the inside and outside of the equipment, and to inspect and maintain key components. For example, clean the steam generator, water tank, drainage pipes, etc., and check whether the door locks, gaskets and other parts are loose or damaged.

5. Safety precautions: When using the table top steam sterilizer, you need to pay attention to safety and prevent accidents. For example, gloves, masks and other protective equipment should be worn during operation to avoid contact with high-temperature parts and hot steam. At the same time, it is necessary to closely observe the working status and indicator lights of the equipment during use, and stop the machine in time if any abnormal situation is found and deal with it.

It should be noted that when using the table top steam sterilizer, it is necessary to choose a product that meets the standards and quality requirements, and operate and use it strictly in accordance with the product manual. At the same time, it needs to pay attention to cleaning and maintenance to prolong its service life and improve the use effect.

In a word, table top steam sterilizer is a common medical equipment, and its use precautions include pre-use inspection, operating procedures, loading items, cleaning and maintenance, and safety precautions. When using table top steam sterilizer, you need to pay attention to safety and quality to ensure its use effect and medical effect.