The anti-bedsore mattress adopts the most advanced physiological and dynamic principles in the world, and is a high-tech medical product forged from imported materials. The alternate air pump is treated with a special process.

Instructions

1. Lay the air cushion flat on the bed, cover the surface with a sheet, and connect the two inflatable pipes on the air cushion to the mouth of the main inflatable pipe.

2. Turn on the power, turn on the power switch, and the host starts to work.

3. When using it for the first time, turn the inflation strength switch clockwise to the "strong" position.

4. At night or when the patient feels that the air pressure changes strongly, the switch can be rotated counterclockwise to a weak inflation state.

Precautions

1. The air cushion should avoid contact with sharp substances to prevent the airbag from being scratched.

2. When cleaning the airbag, it should be gently scrubbed with soap or laundry detergent, and a thin cloth surface can be laid on the air cushion to facilitate cleaning.

3. The effect of the air cushion is better and obvious when the air cushion is placed flat on the hard board bed.

4. During installation and use, all connecting hoses should be checked to avoid bending, so as to keep the air path unobstructed.

5. When using it for the first time, it takes about 10-15 minutes for the host to inflate the air cushion before using it.

6. Users should not disassemble the main air pump by themselves.

7. Store the anti-bedsore mattress in a room with a relative temperature of not more than 80%, no direct sunlight, no corrosive gas and good ventilation to achieve the effect of moisture resistance.