High pressure steam sterilizers is suitable for medical and health undertakings, scientific research, agriculture and other units to sterilize medical equipment, dressings, glassware, solution culture medium, etc. It is an ideal equipment. In order to reduce the frequency of failure of the high pressure steam sterilizer and prolong its service life, let's talk about its use points and maintenance skills in detail.

1. Key points of use:

1. Add an appropriate amount of water to the sterilizer, which cannot exceed the specified water level. After adding the water, wrap the instruments that need to be sterilized in kraft paper. Do not put the instruments in directly. This will not achieve the purpose of sterilization. And for those that need to be filled with culture medium or the bottle needs to be inoculated, use eight layers of gauze to tie the bottle mouth, and then wrap it in kraft paper and put it in for sterilization.

2. Tighten the lid and start heating. When heating, open the exhaust valve. There is a lot of cold air in it that needs to be discharged. If it is not discharged, the temperature will not go up. When heating, pay attention to the temperature and pressure changes. When the temperature reaches 70 degrees, exhaust the air. Turn off the valve and continue to heat up. When it reaches 120 degrees, adjust the power switch, open the exhaust valve properly, and keep the temperature constant.

3. When it reaches the sterilization time, it will start to cool down. When cooling down, you can directly turn off the power and open the exhaust valve slightly. If you want to speed up the cooling, you can wet it with water, but you must unplug the power to avoid electric shock. This It is important to note that safety is very important.

Second, maintenance skills:

1. Change the water quality regularly. If the water inside is used for too long, there will be a lot of dirt, and the residue should be cleaned regularly.

2. Regularly check and calibrate the pressure gauge and temperature gauge. If the instrument is abnormal, stop using it and use it after overhauling.

3. If you don’t need to drain the water in the sterilizer for a long time, keep the tank clean to avoid rusting. After each sterilization, it must be cleaned and the gasket should be dried.

The above are the use points and maintenance skills of high pressure steam sterilizers. Correct use and maintenance methods play a vital role, not only can increase the service life of the equipment, but also save production costs for enterprises to achieve a win-win goal.