There is a certain pressure and temperature in the container of table top steam sterilizer china, which belongs to special equipment. If it is not used properly, it may easily cause personal injury accidents, so you should pay attention when using it.

After the pressure gauge has been used for a long time, if the pressure indication is incorrect or cannot return to zero, it should be replaced in time, and it should be regularly sent to a qualified unit for calibration. If it is not normal, it should be replaced with a new gauge.

There are gaps between the items in the sterilizer, and they are stacked sequentially on the sieve plate in the sterilizer, which is conducive to the penetration of steam and can improve the sterilization effect.

When heating, pay attention to insert the plug of the power cord tightly so that the grounding copper piece of the plug is in close contact with the shield to ensure safe use. Open the exhaust valve at the beginning of heating, and the cold air in the sterilizer will overflow through the valve hole along with the heating. When there is urgent steam rushing out of the valve hole, close the exhaust valve. When the pressure of the sterilizer reaches the required range, properly adjust or turn on and off the heat source to maintain a constant pressure, and start to calculate the disinfection time, and keep the required disinfection time according to different items and packages.