In order to better use the dental autoclave, you need to pay attention to the following matters:

In order to ensure safe use, it should be ensured that the power cord of the dental autoclave has a good grounding, it should be placed in a suitable environment, it should be ventilated and dry, and there should be no inflammable and explosive materials.

Do not disassemble the safety valve, the lead seal and the screw on the steam release valve.

Items stacked in the sterilizer should not exceed 4/5 of the volume, otherwise there will be potential safety hazards.

When stacking sterilized items, it should be ensured that enough space is left, so as not to block the air outlet of the safety valve and the steam release valve, so as to ensure the smooth flow of air and ensure safety.

Before use, check all circuits to confirm that the circuits are safe and normal; check the water volume in the water tank of the autoclave, and confirm that the water volume has not passed the spiral tube.

Open the door to place the sterilized items, and close the closed door of the automatic high pressure steam sterilizer (note that the protruding iron sheet should press the travel switch when closing the door).

The liquid should be filled in a heat-resistant glass bottle for sterilization, the liquid should not exceed 3/4 of the bottle volume, and the bottle mouth should not use a perforated rubber or cork stopper, but a cotton gauze stopper.

Do not put items of different types and different sterilization requirements together for sterilization.

After use, scrub the dental autoclave cover and the sealing ring of the equipment to ensure that there is no oil and no dust.