china table top steam sterilizer is suitable for medical and health undertakings, scientific research, agriculture and other units. It is an ideal equipment for disinfection and sterilization of medical equipment, dressings, glassware, solution culture medium, etc. In order to reduce the failure frequency of China table top steam sterilizer and prolong its service life, let's talk about its main points of use and maintenance skills in detail.

1. Add an appropriate amount of water into the sterilizer, which cannot exceed the specified water level. After adding the water, wrap the instrument to be sterilized with kraft paper, and do not put the instrument directly, otherwise the purpose of sterilization will not be achieved. And for those that need to be filled with medium or the bottle needs to be used for inoculation, the mouth of the bottle should be tied with eight layers of gauze, and then wrapped in kraft paper and put in for sterilization.

2. Close the lid tightly and start heating. When heating, open the exhaust valve. There is a lot of cold air inside that needs to be discharged. If the temperature does not go up, pay attention to the temperature and pressure changes when heating. When the temperature reaches 70 degrees, exhaust the air. Turn off the valve and continue to heat up. When it reaches 120 degrees, adjust the power switch, open the exhaust valve properly, and keep the temperature constant.

3. When the sterilization time is reached, it will start to cool down. When the temperature is down, you can directly turn off the power of the China table top steam sterilizer, and open the exhaust valve slightly. If you want to speed up the cooling, you can wet it with water, but you must unplug the power , so as not to get an electric shock, this is something to pay attention to, safety is very important.