High pressure steam sterilizer china is a device that uses saturated pressure steam to quickly and reliably sterilize articles. It is suitable for medical and health, scientific research, agriculture and other units. Sterilized.

Autoclaving is the use of high pressure and the latent heat released by high heat for sterilization. The principle is that in a closed container, the boiling point of water increases due to the increase in steam pressure, thereby increasing the temperature of the steam for effective sterilization. Since microbial cell proteins are more likely to coagulate in the case of moist heat, the sterilization effect of moist heat is better than that of dry heat at the same temperature, and the penetration of moist heat is stronger.

When using the high pressure steam sterilizer china, remember to remove the cold air from the sterilizer. Because the expansion pressure of air is greater than that of water vapor, when the water vapor contains air, the pressure shown on the pressure gauge is not the actual pressure of the water vapor, but the sum of the water vapor pressure and the air pressure. Because the temperature of the steam containing air is lower than the temperature of saturated steam under the same pressure, when the sterilizer is heated to the required sterilization pressure, if it contains air, the required sterilization cannot be achieved in the sterilizer. temperature, it will not achieve the desired sterilization effect.