Table top steam sterilizer is a common medical equipment used to sterilize medical instruments, petri dishes, test tubes, glassware, etc. Correct daily maintenance can prolong equipment life, ensure work efficiency and sterilization effect. The following are some daily maintenance methods of table top steam sterilizer:

1. Clean the exterior surface: Regularly clean the exterior surface of the table top steam sterilizer to remove dust and dirt. You can use a soft cloth or sponge dampened with water to wipe gently, do not use brushes and sharp objects to scratch.

2. Clean the internal cavity: The internal cavity should be cleaned after each use. First drain the residual liquid in the device, and then wash the inner cavity with warm water and neutral detergent. Finally, rinse with clean water to ensure that there is no residual detergent.

3. Change water quality: table top steam sterilizer usually needs to add water to work. It is recommended to use purified water or deionized water, and avoid using tap water with impurities. If it is found that the water quality has deteriorated or there is a peculiar smell, the water quality should be replaced in time.

4. Check the pressure gauge and safety valve: Regularly check the pressure gauge and safety valve of the table top steam sterilizer to make sure they are working properly. If any abnormality is found, it should be repaired or replaced in time.

5. Regular maintenance: table top steam sterilizer needs regular maintenance, such as replacing the filter element, cleaning the heating pipe, etc. It is recommended to carry out maintenance according to the requirements of the equipment manual, or by professional and technical personnel.

To sum up, the table top steam sterilizer is an important medical device, which requires correct daily maintenance to ensure its working efficiency and sterilization effect. Routine maintenance includes cleaning the external surface, cleaning the internal cavity, changing the water quality, checking the pressure gauge and safety valve, and regular maintenance. When performing maintenance, be sure to follow the requirements of the equipment manual, or have professional technicians perform maintenance.